Read MoreSeacam has released images and details of their new Silver housing for the Canon EOS R5 mirrorless camera and a housing for the Atomos Ninja V recorder/monitor.
The housing is compatible with Seacam’s port system and has three standard ports for vacuum, remote control, or strobe triggering, along with a specific port for Seacam’s new HDMI 2.0 bulkhead.
It is compatible with the Canon EF to R adaptors, allowing the use of both Canon EF and R mount lenses. It has a control that allows access to the camera’s rear multi-controller.
Big lenses are a challenge for housing designers. In order to provide full manual access to lens focus, zoom, and control rings, Seacam has designed a specific extension with an additional manual control gear.
The Ninja V housing will accommodate the Sony NP-F970 which gives around one and a half hours of life.
It has button and dial access to the monitor’s controls and a lever for power, which can be set up to control camera recording too. It has 2 ports that will allow the fitting of a vacuum if required and is supplied with a sunshade for shooting in shallow water.
Seacam owner Harald Hordosch with the new Seacam Silver R5 and Ninja V housings.
Please contact Seacam or your local dealer for availability and pricing details
Tagged: eos r5, news, seacam
by
Seacam has released images and details of their new Silver housing for the Canon EOS R5 mirrorless camera and a housing for the Atomos Ninja V recorder/monitor.
The housing is compatible with Seacam’s port system and has three standard ports for vacuum, remote control, or strobe triggering, along with a specific port for Seacam’s new HDMI 2.0 bulkhead.
It is compatible with the Canon EF to R adaptors, allowing the use of both Canon EF and R mount lenses. It has a control that allows access to the camera’s rear multi-controller.
Big lenses are a challenge for housing designers. In order to provide full manual access to lens focus, zoom, and control rings, Seacam has designed a specific extension with an additional manual control gear.
The Ninja V housing will accommodate the Sony NP-F970 which gives around one and a half hours of life.
It has button and dial access to the monitor’s controls and a lever for power, which can be set up to control camera recording too. It has 2 ports that will allow the fitting of a vacuum if required and is supplied with a sunshade for shooting in shallow water.
Please contact Seacam or your local dealer for availability and pricing details
Seacam has released images and details of their new Silver housing for the Canon EOS R5 mirrorless camera and a housing for the Atomos Ninja V recorder/monitor.
The housing is compatible with Seacam’s port system and has three standard ports for vacuum, remote control, or strobe triggering, along with a specific port for Seacam’s new HDMI 2.0 bulkhead.
It is compatible with the Canon EF to R adaptors, allowing the use of both Canon EF and R mount lenses. It has a control that allows access to the camera’s rear multi-controller.
Big lenses are a challenge for housing designers. In order to provide full manual access to lens focus, zoom, and control rings, Seacam has designed a specific extension with an additional manual control gear.
The Ninja V housing will accommodate the Sony NP-F970 which gives around one and a half hours of life.
It has button and dial access to the monitor’s controls and a lever for power, which can be set up to control camera recording too. It has 2 ports that will allow the fitting of a vacuum if required and is supplied with a sunshade for shooting in shallow water.
Seacam owner Harald Hordosch with the new Seacam Silver R5 and Ninja V housings.
Please contact Seacam or your local dealer for availability and pricing details
Tagged: eos r5, news, seacam